PRODUCTS & SOLUTIONS
An air compressor is a device that converts power (using an electric motor, diesels or gasoline engine, etc.) into potential energy stored in pressurized air (i.e., compressed air).An air compressor is essential for all factory and compressed air’s energy is more expensive than
other energy. So, we should choice air compressor to be right. We have been authorized distributors of KAESER, PUMA & JAGUAR compressors and have sold spare parts. Available in different horsepower from 1HP and above. We specialize in compressed air and can solve your compressed air problems, supporting you and your compressed air system. If you have some problem , you can join us anytime. We are welcome warmly to you.
Portable Air Compressor
A portable air compressor for sale from Compressed Air Systems can help you if you’re on the go and need to transport your compressor to multiple sites. Durability is even more important for portable compressors, as they have to endure the rigors of travel, and the high-quality portable air compressors for sale from us are built to withstand even the toughest auto shop, factory, and other industrial conditions
Rotary Screw Air Compressor
If you’re looking for a rotary screw air compressor for sale, then Compressed Air Systems is the perfect place to turn. Known for its simplicity, efficiency, and ability to run 24 hours a day without overheating, the rotary screw air compressor has gained in popularity for industrial uses.
Air Dryer
As a leading compressed air systems provider, KAESER understands that each component plays an integral role in efficient production of clean, quality compressed air. Therefore, all TAH-TCH series refrigeration dryers are manufactured in KAESER’s own dedicated production center in Gera, Germany, to ensure the very highest standards in system reliability and performance.
Line Filter
In order to ensure that the required grade of compressed air purity is consistently maintained, the filter elements should be replaced at the end of their service life. In addition, dependable condensate drainage is an essential part of reliable and environmentally-sound filtering out of aerosols. The automatic ECO-DRAIN 31 F condensate drain was especially designed for use with coalescence filters accumulating condensate is reliably removed without pressure loss.
Oil Free Air compressor
Offering a superior combination of low maintenance, low mess, and low noise, oil less air compressors are a popular choice for many businesses. Many type of food production and dental clinics use oil free air compressors because their productions are more sensitive and careful for their consumers.
KAESER
One of the most highly respected and renowned manufacturers in the world, KAESAR air compressors truly are the best of the best. They come from GERMANY and Compressed Air Systems is proud to be an authorized KAESER dealer and we offer many makes and models of KAESER compressor for sale.
Rotary screw compressors
Rotary screw compressors supply production processes in industry, trade and workshop applications with a reliable supply of quality compressed air. They are the preferred choice for users requiring constant pressure over prolonged periods.
To ensure that our rotary screw compressors operate as efficiently as possible, we developed our own special rotor profile. Our SIGMA profile rotors provide you with energy savings of up to 15 % compared with conventional rotor profile designs.
Furthermore, our air ends with SIGMA profile rotors boast an exceptionally long service life. This is in no small part due to the roller bearings we choose to use: they are precision adjusted and generously sized. Combine this with our in-house high-end manufacturing processes with lowest possible manufacturing tolerances and you have an exceptional product.
Rotary screw compressors with fluid cooling
Large selection – Low life-cycle costs
Fluid-injected rotary screw compressors are used in a wide range of sectors. They are highly durable and operate reliably and efficiently even at high temperatures of up to 45 °C. The associated investment costs are comparatively low.
However, the lion‘s share of life-cycle costs is spent on energy (up to 80 %). in fact, energy costs taken over the lifetime of a compressor, add up to a multiple of investment costs. For this reason, Kaeser rotary screw compressors are equipped with energy-saving SIGMA profile air end rotors that save up to 15 % energy compared to conventional rotor profile designs
Compressed air supply systems
Perfect efficiency with minimal space requirements
Our SXC and AIRCENTER air systems combine rotary screw compressor, refrigeration dryer and air receiver under a single enclosure. Due to their small footprint, these complete systems are the perfect solution for workshops and smaller industrial facilities.
Turnkey solutions: KAESER rotary screw vacuum pumps
The complete solution for vacuum generation.
Our rotary screw vacuum pumps are equipped with a specially-developed KAESER vacuum airend with SIGMA profile. Single-stage vacuum generation supplies a so-called low vacuum. We offer three series with these technical data:
•Intake capacity: 4.75 to 15.70 m³/min
•Final vacuum: 99 %
•Pressure: 10 mbar (a)
The connection-ready packages are the solution for dust extraction, packaging and filling machines, drying, degassing or filtration, for example.
Heat recovery: Save up to 96 % energy!
A rotary screw compressor converts 100 % of the drawn electrical energy into heat. Up to 96 % of this energy can be recovered.
The fully-enclosed design of modern rotary screw compressors makes them especially suitable for heat recovery. This fact applies to both fluid-injected as well as to oil-free compressors.
Reciprocating compressors
Ideal for fluctuating air demand The optimal duty cycle for reciprocating compressors is between 60 and 70 %. As such, they're the best choice for high-fluctuation operation with load peaks – especially for trades, workshops and small industry.When used as boosters, reciprocating compressors can augment existing system pressure, raising it to 45 bar in specific locations.
Portable reciprocating compressors
Making your work easier
Portable reciprocating compressors from KAESER augment the quality and cost-effectiveness of your trades work. Our range includes numerous sizes to cover a wide spectrum of application areas:
Compressed air supply for small and growing workshops and trades businesses
Continuous use on construction sites, for associated building trades or in larger workshops
i.Comp 3
Specially designed for trades applications
No matter what the project or which construction job is nearing completion - you have a reliable partner by your side with the i.Comp 3. The i.Comp 3 provides you with a versatile and dependable supply of oil-free compressed air at all times.
This flexible all-rounder can be taken anywhere thanks to its low weight and space-saving, compact design.
The i.Comp 3 is available with the following performance specifications:
•Constant pressure up to 11 bar
•Flow rate up to 160 l/min
PREMIUM series workshop compressors
Accept no compromises
Kaeser PREMIUM workshop compressors are constructed for years of daily use – both in the workshop as well as on construction sites. Kaeser has developed models to suit every application,
with the following performance parameters:
Pressure: 10/20/25 bar
Displacement: 130 – 660 l/min
Choose from the following versions:
A robust compressor designed for continuous use on construction sites: PREMIUM CAR
A compact compressor for other building trades: PREMIUM COMPACT
A flexible compressor for the workshop: PREMIUM
CLASSIC series workshop compressors
Outstanding quality with great value
We have designed CLASSIC series compressors especially for small, up and coming trades businesses. The product range focuses on common sizes allowing us to deliver exceptional value for money.
Our CLASSIC workshop compressors feature the following performance parameters:
•Pressure: 10 bar
•Displacement: 210 – 460 l/min
They are especially suitable for automotive workshops as well as for construction and renovation tasks. CLASSIC series compressors supply energy to the following compressed air tools:
•Paint spray guns and spray guns
•Tyre inflator with pressure gauge
•Blow guns
•Impact wrenches
•Chipping hammer
Stationary reciprocating compressors
Always at hand for the widest range of applications
From filling tyres in the workshop to transporting bulk materials in industry – our stationary reciprocating compressors offer exceptional versatility.
We would be pleased to offer you a consultation to determine which solution is best suited to meet your specific application‘s needs.
Stationary workshop compressors
A sure fit for even the smallest workshop
Stationary EUROCOMP series reciprocating compressors are designed and built for continuous use in workshops. For straightforward installation Kaeser offers flexible air receiver installation options. Choose between the following versions:
•A horizontal compressed air receiver: the most common version for larger spaces
•A vertical compressed air receiver: the small footprint version for smaller spaces
•Units that can be integrated or added into existing compressed air systems
The compressor blocks feature the following performance parameters:
•Pressure: 10/15 bar
•Flow rate: 112 – 1050 l/min
Industrial quality oil-lubricated reciprocating compressors KCCD and KCD series
Durable and straightforward operation
Oil-lubricated reciprocating compressors deliver high pressures and flow rates for industrial applications. Harmful gases in the ambient air are removed by the lubricant. Kaeser offers two versions of oil-lubricated reciprocating compressors:
•For fail-safe dependability: Dual units comprising two compressors and an air receiver
•For integration into individual or existing systems: Integrated base-mounted units
The compressor blocks feature the following performance parameters:
•Pressure: 10/35 bar
•Flow rate: 60 – 1400 l/min
